APPLICATION AND USE. Preparation. Use in accordance with the standard Global Yacht specifications. All surfaces to be coated should be. Interline Glass Flake Vinyl Ester. Consult your International Paint representative for the system best suited for the surfaces to be protected. International Interline is a two component, heavy duty vinyl ester coating reinforced with glass flake to increase chemical and abrasion resistance.
|Published (Last):||1 June 2017|
|PDF File Size:||18.80 Mb|
|ePub File Size:||2.21 Mb|
|Price:||Free* [*Free Regsitration Required]|
If oxidation has occurred between blasting and application of Interlinethe surface should be reblasted to the specified visual standard. Actual safety measures are dependant on application methods and work environment. International Interline is a two component, heavy duty vinyl ester coating reinforced with glass flake to increase chemical and abrasion resistance. This product is no longer in stock.
The question has been correctly sent. Multiple coats may be required to achieve specified film thickness. Do not exceed pot life limitations. Marine Coatings Marine chemicals Marine lubricants. Once the unit has been mixed, it must be used within the working pot life specified.
Unmixed material in closed containers should be maintained in protected storage in accordance with information given in the STORAGE Section of this data sheet. Prior to use, obtain, consult and follow the Material Safety Data Sheet for this product concerning health and safety information.
International Interline – Rawlins Paints
The recommended level of retarder solution is as follows: Subject to re-inspection thereafter. Where necessary, remove weld spatter and smooth weld seams and sharp edges.
Proper ventilation and protective measures must be provided during application and drying to keep solvent vapour concentrations within safe limits and to protect against toxic or oxygen deficient hazards. These may be subject to variation depending on factors such as differences in colour and normal manufacturing ingerline.
Consult your local International Paint representative for specific recommendations. High pressure fresh water wash or fresh interliine wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning. The minimum purchase order quantity for the product is 1. A surface profile of microns is recommended.
Once units of paint have been mixed they should not be resealed and it is advised that after prolonged stoppages work interrline with freshly mixed units.
It is your responsibility to read the Product Data Sheets available below before you place an order and prior to application of the product. International Interline Reference: Material is supplied in 2 containers as a unit. Take precautions to avoid skin inteerline eye contact ie. Application by brush is recommended for small areas only. Customer agrees that before placing an Order, Customer has read and understood the most up to date Product Data Sheet for the Product.
Consult your International Paint representative for the system best suited for the surfaces to be protected. Send us your question.
International International Interline is a two component, heavy duty vinyl ester coating reinforced with glass interlline to increase chemical and abrasion resistance.
If a holding primer is required, please consult International Paint for a product suitable for the area of application. Coverage rates quoted are approximate, you agree that knterline depends on the condition of the substrate, surface absorption, texture and application method. The recommended level of retarder is as follows: Read and follow all interlinne notices on the Material Safety Data Sheet and container labels.
VOC values are typical and are provided for guidance purposes only. Keep fluid lines as short as possible and use Teflon Packings.
Application Guidelines – Marine – AkzoNobel
As application, environmental and design factors can vary significantly, due care should be exercised in the selection, verification of performance and use of the coating. Overcoating information is given for guidance only and is subject to regional variation depending upon local climate and environmental conditions.
If you do not fully understand these warnings and instructions or if you can not strictly comply with them, do not use intrline product. Test performance results were obtained in a controlled laboratory environment and International Paint makes no claim that the exhibited published test results, or any other tests, accurately represent results found in all field environments.
All surfaces to be coated should be clean, dry and free from contamination. Frequency of cleaning will depend upon amount sprayed, temperature, relative humidity and elapsed time, including any delays. Please ensure you refer to all datasheets for full application information. Typical Coverage per coat. A two pack, glass flake reinforced vinyl ester tank coating. Use in accordance with the standard Worldwide Marine Specifications.
Fresh water wash to remove all dirt and contamination. The figures stated above are approximate. Customer further agrees that we have no liability for any errors or omissions contained within the Product Data Integline.
In the event welding or flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation.
I would like to hear about offers and services: We recommend that Customer first purchases the smallest Product available or access an industry standard colour chart in person and not digitally to ensure that the colour is acceptable for its purposes. Knterline oxidation has occurred between blasting and application of Interlinethe surface should be reblasted to the specified standard.